Professional Metal Roof Ridge Cap Roll Forming Machine Made In China parameters
Manual Un-coiler |
◊ Max Capacity: 5000kgs
◊ Inner diameter of coil: 400-600mm
◊ Manual with brake |
Leveling Device |
◊ Ensure the material level and straight
◊ The width can be adjusted |
Main Forming System |
◊ Width & Height & Thickness of sheet: According to Drawings
◊ Material: GI sheet coil or Colored sheet coil
◊ Motor Power: 5.5 kw forming system
◊ Roller material:Cr12.
◊ Surface of Roller: Heat treatment HRC58-60.
◊ Diameter of main shaft: 60mm #45 steel, heat treat modulation
◊ Forming station: 12 stations.
◊ Transmission: by chain and gear
◊ Measuring accuracy: +/- 0.5 mm/M.
◊ Safety Hood: Cage
◊ Arch middle plate: 30mm thickness.
◊ Output: 8-10 Tons per shift (8 hrs.).
◊ The machine base is assembled and welded by high quality steel. |
Hydraulic Cutting Device |
◊ Cutting way: Tracking (Flying)..
◊ Oil pump station: 1set
◊ Motor power of Oil pump station: 7.5kw with cooling system.
◊ Forced air cooling device available.
◊ Cutting mould: 1 sets.
◊ Material of blade: CR12 with heat treatment HRC60-62. |
Electrical System |
◊ Control system: HMI & PLC control panel.
◊ Power: 440V 50Hz (as per local requirement) |
Run-out Table |
◊ Frame: 8# steel groove welded
◊ Roller type.
◊ Quantity: 1 pc |
3. Professional Metal Roof Ridge Cap Roll Forming Machine Made In China after-sales service
(1) Once you paid the deposit, we will start the production as soon as possible. When the machine is finished, you can come to check the machine, we will arrange your accommodation and relative schedule. If you don't come, we can test the machine and send you test video. It's no problem.
(2) Our machines have one year guarantee, within one year, if the machine parts has some problem, we will be in charge of the repairing or replace. Also we will deliver the customer some spare parts together with the machine when loading the machine.